Servo Stabilizer

  Specification
 
Parameter 1-Phase 2-Phase 3-Phase Unbalanced Air cooled 3-Phase Unbalanced Oilcooled 3-Phase Unbalanced Oilcooled Energy Conserved Lighting load Centralized Stabilizer for offices & residence
Rating (KVA) 1-20 0.5-20 3-100 3-200 3-250 3-500 3-500
I/P Voltage range (V) 170-270
195-265
340-480 310-480
340-480
360-460
310-480
340-460
360-460
340-480
360-460
310-480
340-480
360-460
310-480
340-480
360-480
O/P Voltage (normal) 230V 415V 415V 415V 415V 208 V LN 220V/230V LN
Alternate O/P setting 220V/240
380V/400LL
220V LN 220V/230V LN
O/PV regulation
+ % of nominal output voltage
O/PV Indications
Digital Voltmeter, accuracy 1% of + 1 digit
LED
Indications
Front panel indicators, input ON, Input high/low output High/Low trip
Under over voltage trip
Electronic cutoff circuit with graded time delay set @ + 5%-10% nominal voltage
Over load cut off
Electronic cutoff circuit with graded time delay set @ 110% of rated full load current .
Single Phasing Prevention Not applicable Provided Individual Phase cutoff only
Service bypass Not provided Provided up to 100Kva.3Phase Individual Phase bypass provided up to 50 kVA 3-ph
Resetting mode
Automatic restart with delay mode of 15 sec.(optiona
 

 
Copyright © 2005. amonups.com. Powered by Nissi Infotech